Topcoats

PROTECH 50

An economical, aliphatic, single component, liquid applied, moisture cured, polyurethane surface protection coating.
PROTECH 50 Product Data Sheet
PROTECH 50 MSDS

PROTECH 100

A polyester, aliphatic, single component, liquid applied, moisture cured, polyurethane topcoat for waterproofing membrane systems. PROTECH 100 is suitable for concrete, metal, wood, rubber, and other similar substrates.
PROTECH 100 Product Data Sheet (clear and pigmented)
PROTECH 100 (Clear) MSDS
PROTECH 100 (Pigmented) MSDS

PROTECH 1110

A two component, aliphatic polyester polyurethane for use in moderate to severe chemical environments in indoor or outdoor applications. This product does not meet VOC requirements for SCAQMD areas. The use of this Hightech product may contribute to obtaining LEED MR Credits 1.1 & 1.2.
PROTECH 1110 Product Data Sheet

PROTECH 7000

A high solids, spray-applied, aliphatic polyaspartic polyurea with excellent retention, gloss and UV stability characteristics. It can be applied at any thickness of 8-12 mils (200-300 microns) in a single pass on horizontal surfaces or multiple passes on vertical surfaces. The use of this product may contribute to obtaining LEED MR Credits 1.1 & 1.2.
PROTECH 7000 Product Data Sheet
PROTECH 7000 Clear A-Side MSDS
PROTECH 7000 Pigmented, A-Side MSDS
Hightech_industrial_coatings_PROTECH 7000 Pigmented, B-Side_MSDS

PROTECH 7072SC

An aliphatic polyaspartic, environmentally friendly surface topcoat for waterproofing membrane systems. PROTECH 7072SC is quick curing and specifically formulated to be installed in thin film applications. It is designed for use in Southern California and is in compliance with SCAQMD air quality standards.
PROTECH 7072SC Product Data Sheet
PROTECH 7072SC, A-Side MSDS
PROTECH 7072SC, B-Side MSDS

TECHGARD 246

A single component, liquid applied, moisture cured, aromatic polyurethane waterproof membrane. The use of this Hightech product may contribute to obtaining LEED MR Credits 7.1 & 7.2.
TECHGARD 246 Product Data Sheet
TECHGARD 246 MSDS

PROTECH PLUS

A single component, low viscosity, accelerating agent. This accelerator enhances the moisture curing characteristics of all grades of PROTECH COATINGS and the TECHGARD 246.
PROTECH PLUS Product Data Sheet
PROTECH PLUS MSDS

TECHGARD 295

A two component, fast setting, rapid curing and solvent free, high solids, hybrid aliphatic polyurea elastomeric membrane. TECHGARD 295 can be applied to properly prepared interior or exterior concrete, plywood and metal surfaces. It is suitable for single or multiple applications, in temperatures as low as 20°F and is insensitive to moisture. The use of this Hightech product may contribute to obtaining LEED MR Credits 7.1 & 7.2.
TECHGARD 295 Product Data Sheet
TECHGARD 295 A-Side MSDS
TECHGARD 295 B-Side MSDS

NOVOTECH 500

A multifunctional phenol novolac resin that is extremely chemical resistant with a high heat deflection temperature. NOVOTECH 500 is a thick film novolac lining designed to cure at ambient temperature to provide exceptional corrosion protection for surfaces in severe chemical and physical environments.
NOVOTECH 500 Product Data Sheet
NOVOTECH 500 MSDS

NOVOTECH 700

A multifunctional phenol novolac resin that is extremely chemical resistant with a high heat deflection temperature. NOVOTECH 700 is a thick film novolac lining designed to cure at ambient temperature to provide exceptional corrosion protection for surfaces in severe chemical and physical environments. NOVOTECH 700 provides a high degree of protection against corrosive moisture, fumes, carbon dioxide, hydrogen sulfide, methane gases, industrial water and wastewater solutions containing salts, detergents, many acids, alkalis, and other chemicals. NOVOTECH 700 is used as a heavy-duty chemical resistant protective lining as it is resistant to petroleum products such as kerosene, diesel, gasoline, aviation fuels, motor oils, lubrication materials, greases, hydraulic fluids, alcohols, aliphatic and aromatic hydrocarbon solvents.
NOVOTECH 700 Product Data Sheet
NOVOTECH 700 MSDS

steps
industrial epoxy floor coating

Bathroom floor coated with epoxy